Charging - Sharp AQUOS sense3 Instruction Manual

Removing microSD Card
„
z For details on how to insert and remove the docomo nano UIM
card and microSD Card tray, refer to "Inserting and removing the
docomo nano UIM card and microSD Card tray" (
1
Remove the docomo nano UIM Card and
microSD Card tray
2
Remove the microSD Card from the docomo
nano UIM Card and microSD Card tray
3
Turn the display side up and then insert the
docomo nano UIM card and microSD Card tray
into the handset

Charging

The internal battery is not fully charged at the time of
☞
purchase. Be sure to charge the battery before use.
P. 27).
z The latest charger compatible with the handset can be checked
on docomo online shop.
h ttps://onlineshop.smt.docomo.ne.jp/options/search.html)
(
Japanese only)
Cautions while charging
„
z For details on the estimated charge time and battery life when
fully charged
z The battery can also be charged with the handset turned on
(While charging, the battery icon appears with [ ]
superimposed).
z Do not charge for a long time with the power left turned on. If the
handset is left turned on after charging is complete, the internal
battery charge level decreases.
In this case, an AC or DC adapter (sold separately) charges the
battery again. However, depending on the time when the handset
is disconnected from the AC adapter or DC adapter, the battery
charge level may be low or the battery may only be usable for a
short time.
z If the handset is left for a long time even after the charging is
completed, the battery level may decrease.
z When the battery is empty and the handset is being charged, the
charging lamp may not illuminate immediately. However, charging
is in progress.
z If the battery empty alert is displayed and the power cannot be
turned on, charge the battery for a while.
39
☞
P. 222 "Main specifications"
Before Using the Handset
(in