Sharp AQUOS sense3 Instruction Manual page 53

Vertical/Horizontal display
„
The screen display is automatically switched vertically or
horizontally according to a tilt of the handset.
z Vertical/Horizontal display may not be switched or may be
pinned a display depending on the screen being displayed, even
if the handset is turned.
z Vertical/Horizontal display is not switched if the handset is turned
while it is positioned parallel to the ground.
z The screen display may not be switched properly when a sound
or a vibration is being activated.
z Vertical/Horizontal display may not be switched properly right
after the display or power is turned on.
z You can set the display not to automatically switch (
"Display"). It can also be set from the status panel (
"Using the status panel").
z Screens may be displayed in the full screen depending on the
app when you switch from vertical display to horizontal display.
Shooting screenshot
You can shoot the screen being displayed as an image.
z Shot images are saved on the handset memory and you can
check them by using Photos or other apps.
z Alternatively, you can shoot the screenshot by using Clip Now
☞
( P. 166 "Clip Now").
1
3 (Power key) (at least 2
[Screenshot]
z Menus such as [Power off] and [Restart] are not shot.
z Also hold 3 (Power key) + 2 down for at least 1 second to
☞ shoot the screen being displayed as an image.
P. 162
☞
P. 63
Data cannot be saved while displaying e-books, etc.
z
Data may not be saved completely or partially depending on
z
the app.
51
seconds)▶
Basic operation