Sharp AQUOS sense3 Instruction Manual page 174

Face authentication
Face authentication is an authentication function to recognize
the face of the owner.
You can unlock the touch panel, etc.
Cautions when using face authentication function
„
z To enable face authentication to be implemented in the optimal
manner, be careful with regard to the following points when
registering your face.
„ Register your face in a bright location. However, do not
register your face in a backlit location.
„ Ensure that your face is not covered by clothing, hair,
sunglasses, mask, etc.
„ Shoot a picture of your face while your entire face is inside the
frame of the registration area and while making sure you do
not move your head or close your eyes.
z When performing face authentication in the lock screen, be
careful with regard to the following points.
„ The face authentication success rate may decrease in
extremely dark or bright locations or in backlit locations.
„ If your entire face or a part of your face is covered with
clothing, hair, sunglasses, mask, etc., the face authentication
success rate may decrease.
„ Unlocking may also be possible using a person or object that
resembles you.
Registration of face
„
Register your face data to use for face authentication.
z You can only register one face.
z Set Screen lock to an item other than [None] or [Swipe or Touch]
☞
in advance ( P. 169 "Security & location").
1
In the home screen, select "apps
[Settings]▶[Security & location]▶[Face
authentication]
z Unlock the screen by method set in Screen lock.
2
[NEXT]
z You can add a check to [Make the function available to light
up the screen by lifting up.] and enable [Turn screen on by
☞
holding] ( P. 167 "Auto sleep Off").
3
Check the information▶[OK]
4
Display the face to register in the screen
5
Select the timing of face authentication▶[OK]
z If you select [As soon as you see], face authentication is
performed in the lock screen of the touch panel.
z If you select [After you see what is displayed on the screen],
face authentication is performed in the screen after touching
[ ] in the lock screen of the touch panel.
Note that if Screen lock is set to [None] or [Swipe or Touch],
z
registered face is deleted.
172
folder"▶
Handset Settings