Safety Information; Sicherheitshinweise - Balter IP-D1231VR Manual

1.4 Safety Information

Warning
This symbol represents possible dangers, risks or circumstances
requiring special attention. The user must comply with the handling-,
maintenance-, and repair instructions
Beware
The lightning symbol in a triangle represents dangerous currents close to the
product casing that can seriously harm an persons.
1.5 Safety Instructions
Never touch current-carrying electrical parts.
~
Electrical shocks can be avoided. Follow the procedures listed below. Incorrect installation, improper grounding and
~
incorrect handling and maintenance pose potential dangers.
Do not install or remove the device during rain and heavy wind. Do not try to install, remove or handle the device
~
during thunderstorms.
Make sure that all electrical devices and the working platform are properly grounded.
~
Avoid electrical shocks by grounding the power supply, control cabinets and working platforms.
~
Always use the correct cable size.
~
Continous overload results in cable damages and poses a risk of electrical shocks and is a fire hazard. The specifica
~
tions of the cables must comply with the specifications of the power supply.
Keep the cables and connectors in a good condition.
~
Improper and worn out connectors can cause short circuiting and pose a threat of electric shocks. Never use worn
~
out, damaged or exposed cables.
Always avoid open-circuit voltage.
~
Always war isolating gloves while handling the device.
~
When handling the device, always make sure to disconnect it from the power supply and to wear isolating gloves.
~
Always wear protective clothing, for example long-sleeved shirts, when installing or removing a device.
~
Always wear comfortable, sturdy shoes.
~
Make sure to wear clean clothes, free of oil- and grease stains.
~
Protect other workers in close proximity to you from exposure to arc radiation.
~
Wear long pants or jeans while installing or removing the device.
~
While working, always wear a helmet or other robust headgear. Also wear protective footwear.
~
Store the device in a dry place.
~
When working in elevated areas, always wear a strap.
~
Always wear dry clothing, avoid water and moisture.
~
When working at night, always wear a safety west.
~
Make sure that all connectors are tight, dry and clean.
~
To avoid electrostatic charging, make sure you are isolated.
~
Always wear dry gloves, shoes with rubber soles or stand on a dry piece of wood or a platform.
~
Always follow common safety standards.
~
Always wear appropriate eye-, hearing-, and body protection.
~
Make sure that another person is on site when working in dark, badly ventilated or elevated areas.
~
4