Montage Ip-T1241Gr/Ip-T1441Gr - Balter IP-D1231VR Manual

2.4.2 Installing IP-T1241GR/IP-T1441GR
The camera is weather resistant according to IP66. However, this does not apply to cables
c
and connectors. We recommend installing the camera below the ridge line to prevent
moisture entering the camera
Hold the camera to the desired position and mark
1.
the boreholes.
Attach the camera to the wall using screws.
3.
Adjust the camera's image remotely via
&
Drill holes at the marked positions and insert dovels.
2.
Connect the cables with the corresponding connectors. If using the camera
outdoors, wrap the cables with butyl tape.See page 15 for further
information
Adjust the camera's position.
4.
Loosen Screws A and B to adjust the camera's position vertically. Loosen
screw C to turn the camera along it's own axis. Tighten the screws to
secure the camera in it's current position.
14
B A
C