Installing The Ip-Mt1411Gr - Balter IP-D1231VR Manual

2.5.2 IP-MT1411GR Installation
The camera is watherproof according to IP66. However, this does not apply to the cables
c
nor the connectors. We recommend installing the camera below the eave to prevent
moisture entering the camera via the connectors.
Hold the camera against the wall and mark bore-
1.
holes at the desired position.
Attach the camera to the wall using screws.
3.
Use a service monitor or the webclient to check if the camera was positioned correctly.
&
Drill the holes and insert dovels.
2.
Loosen the lock ring (7) and align the
4.
camera.
17