Chicco 000.71553.000.000 Manual page 11

• Approximately 3 minutes before reaching the set temperature, the display will show the countdown
of the minutes, from 3 to 0.
• The end of the warming up cycle will be indicated by the number 0 on the display, together with 3
sound signals in sequence.
* The heating time can vary depending on the size or type of the feeding bottle, and the quantity and/or
initial temperature of the food inside the feeding bottle.
• In case you wish to stop the warming up cycle before the end of the program, simply turn the knob to
the 0 (SWITCHED OFF) position.
Warning! Before feeding baby, it is recommended to:
a) Dry the feeding bottle thoroughly.
b) Shake the feeding bottle for a few seconds in order to homogenise the temperature of the food
inside.
c) Always check that the temperature of the food is not too hot before feeding baby (by pouring a few
drops of liquid on the inner part of your wrist).
Warning: If the feeding bottle is left into the equipment after the warming up cycle, the temperature of
the food inside the feeding bottle may exceed 37°C considerably. Always check the temperature of the
food before feeding baby.
HOW TO WARM UP BABY FOOD JARS
• Repeat the operations indicated at the beginning of the "How to Prepare the Equipment" paragraph
(pour approximately 40ml of water into the heating chamber of the feeding bottle warmer).
• Remove the lid and any labels from the baby food jar, and insert the jar into the feeding bottle warmer
using the appropriate support.
• Place the feeding bottle warmer onto a flat, stable surface, and connect the plug to a mains socket.
• Select the baby food jar warming mode, turning the selector knob to the position corresponding with
C*
the program 5 icon, as shown in the chart above.
• The display will show the program number.
• Press the ON/OFF switch (l) located on the right of the feeding bottle warmer; the equipment will start
the warming up cycle.
• During operation, the number of the selected program shown on the display will be substituted by a
sequence of running bars.
• Approximately 3 minutes before reaching the set temperature, the display will show the countdown
of the minutes, from 3 to 0.
• The end of the warming up cycle will be indicated by the number 0 on the display, together with 3
sound signals in sequence.
* The heating time can vary depending on the initial temperature of the baby food.
Remove the jar from the chamber by lifting the jar with the specific baby food jar support
Warning: Stir jar content several times during the warming up cycle to homogenise temperature.
In case you wish to stop the warming up cycle before the end of the program, simply turn the knob to
the 0 (SWITCHED OFF) position.
Warning: Before feeding baby, it is recommended to:
a) Dry the baby food jar thoroughly.
b) Stir jar content for a few seconds, in order to homogenise the food temperature.
c) Always check that the temperature of the food is not too hot before feeding baby (by pouring a few
drops of liquid on the inner of part your wrist).
11