CyberPower CSP806U User Manual

8-Outlet Surge Protector 8-Outlet Surge Protector
CSP806U CSP806U
3
PROTECTED GROUNDED
1
2.4A USB
5
USER'S MANUAL
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CSP806U Surge
Protector. The information contained in this brochure explains
the features and operation of the CSP806U. Please take a few
moments to read this manual.
FEATURES
1. Protected LED Indicator
Illuminated when the surge protection feature is working properly.
2. Grounded LED Indicator
Illuminated when a properly grounded AC outlet is detected.
3. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15A
breaker. When an overload occurs, it will automatically
switch o . To resume operation, ensure the overload
condition is removed and reset the surge protector by
switching the unit ON.
4. USB Charging Ports*
Connect and charge up to two (2) USB devices using the
surge protected USB charging ports.
2
*USB outlets cannot be used as a USB hub. This device does
not transfer data.
5. Wide-Spaced Outlet
Easily plug in large chargers without interfering with the
other outlets.
SPECIFICATIONS
• Model Number: CSP806U
• Outlets: 6 Standard Outlets, 2 Transformer Spaced outlets, 2
USB charge ports (2.4 Amps, shared)
• Surge Protection: 3,000 Joules
• Electrical Rating: 125V/15A/1875W
• UL Clamping Voltage: UL 1449 3rd/600V(H-N, H-G, N-G)
• Maximum Peak Current: 105,000A
• 3 AC Lines Protected: H-N:
N-G: 30,000A
• Response Time: Less than 1 nanosecond
• USB charger rating: 5V/2.4A total
• Circuit Breaker: Resettable 15 Amp
4
• Plug Style: Right angle type
• Power Cord Length: 6 ft cord
45,000A; H-G: 30,000A;
1
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. DO NOT plug into another
relocatable power tap. DO NOT "daisy chain" surge
protectors. DO NOT use with any aquarium equipment. DO
NOT use if properly grounded outlets are not available. DO
NOT install this device if there is not at least 10 meters (30
feet) or more of wire between the electrical outlet and
electrical service panel. This device features an internal
protection that will disconnect the surge protective
component at the end of its useful life, but will maintain
power to the load – now unprotected.
TROUBLESHOOTING
If the ON/OFF is switched o , the 15 AMP circuit breaker may
have tripped. Examine your connected equipment and
remove the device that is overloading the circuit. Then, the
ON/OFF switch back to RESET.
If the Grounded indicator does not light when you plug in the
surge protector, move the surge protector to a di erent
grounded three-prong AC outlet. If it still does not light,
return the product to dealer for assistance. If the surge
protector proves to be working properly, your outlets may
not be a properly grounded and need to be repaired by a
professional electrician. If the Grounded indicator turns o
after a period of use, the surge protection has been depleted.
Replace your surge protector.
If the Protected indicator does not light, the surge protector's
AC lines is no longer protected from surge. Replace the surge
protector. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment, but it
will not protect against future surges and spikes.
TECHNICAL SUPPORT
Please contact our Tech Support department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday
7:00am – 6:00pm CST
2