CyberPower P600WU User Manual

8-Outlet Surge Protector
(6 AC & 2 USB Ports)
P600WU
USER'S MANUAL
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower P600WU Surge
Protector. The information contained in this document
explains the features and operation of the P600WU. Please
take a few moments to read this manual.
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
4
5
FEATURES
1. Standard Spaced Outlets (6)
2. USB Charging Ports (2)
3. Surge Protection LED
4. Grounded LED
5. Anchoring Screw
SPECIFICATIONS
• Model Number: P600WU
• Outlets: 6 Standard Outlets
• Surge Protection: 1200 Joules
• Electrical Rating: 125V/15A/1875W
• UL Clamping Voltage: UL 1449 3rd/400V (L-N), 500V
(L-G,N-G)
• Maximum Peak Current: 52,500A
• 3 AC Line Protected: H-N: 22,500A H-G: 15,000A N-G:
15,000A (The maximum surge possible on household
Wiring is 6,000 volts)
• Attenuation: Up to 32dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
1
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. Use only with duplex
receptacle having center screw. DO NOT plug into another
relocatable power tap. DO NOT "daisy chain" surge
protectors. DO NOT use with any aquarium equipment. DO
NOT use if properly grounded outlets are not available. DO
3
NOT install this device if there is not at least 10 meters (30
feet) or more of wire between the electrical outlet and
electrical service panel. This device features an internal
protection that will disconnect the surge protective
component at the end of its useful life, but will maintain
power to the load – now unprotected.
TROUBLESHOOTING
1
If the GROUNDED indicator does not light when you plug in
the surge protector, move the surge protector to a di erent
grounded three-prong AC outlet. If it still does not light,
return the product to dealer for assistance. If the surge
protector proves to be working properly, your outlets may
not be properly grounded and should be inspected by a
professional electrician.
If the PROTECTED indicator does not light, the surge
2
protector's AC line is no longer protected from a surge.
Replace the surge protector. The surge protector may have
received a power surge or spike beyond its specified limits
that overloaded the protection circuitry and rendered it
inactive. The surge protector has protected your
connected equipment but it will not protect against future
surges and spikes.
TECHNICAL SUPPORT
Please contact our Tech Support department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday,
7:00am – 6:00pm CST
2