Withings BPM Core Installation And Operating Instructions Manual page 23

5. Place your hand on the metal and the stethoscope against your chest. Adjust
your arm position to ensure an accurate recording.
6. At the end of the recording, select the user by swiping the light trail on the
right part of the screen.
7. Press the button of BPM Core to validate.
Results are displayed on the screen of BPM Core and sent via Wi-Fi or
Bluetooth in the Health Mate app.
Note:
• If you don't place your hand on the electrode, BPM Core can't record ECG and
stethoscope signal (heart sounds measurements). BPM Core will only record
and display blood pressure readings.
• The ECG measurement mode doesn't record blood pressure
BPM Core
v1.0 | July 2019
.
EN - 23