Get/Set Output Mute; Get/Set Output Master Mute; Get/Set Output Volume; Get/Set Output Master Volume - QSC Axon DTH1620 User Manual

Get/Set Output Mute

This set of commands gets and sets the output mute status for each output channel (parameter 1 is 1...16) or for all output channels
(parameter 1 is 0).
Description of Command
Get mute setting for output channel 14
Unmute output channel 14
Get mute settings for all output channels
Unmute output channels 1..4, mute output channels 5..16

Get/Set Output Master Mute

This set of commands gets and sets the output master mute status. The master mute mutes all channels simultaneously. Clearing
Master Mute will only clear the master mute state; it will not clear an individual channel's mute state.
Description of Command
Get Master Mute setting
Set Master Mute

Get/Set Output Volume

This set of commands gets and sets the volumes for each output channel (parameter 1 is 1...16) or for all output channels (parameter 1
is 0) range is +24 dB to -103 dB. The total output volume is a combination of the individual channel and Master volume up to the 20W
maximum for the channel.
Description of Command
Get volume setting for output channel 9
Set volume setting for output channel 9
Get volume settings for all output channels GOV 0<CR>
2. 16 values space delimited following the 1nd param.

Get/Set Output Master Volume

This set of commands gets and sets the Output Master Volume. Range is +24 dB to -103 dB. The Master volume is applied after the
individual channel volume settings. For a direct pass through of channel volumes, the Master Volume should be set to 0 db. The total
output volume is a combination of the individual channel and Master volume up to the 20 W maximum for the channel.
Description of Command
Get Master Volume setting
Set Master volume setting.
TD-001622-01-A
GOM 14<CR>
SOM 14 0<CR>
GOM 0<CR>
SOM 0 0xFFF0<CR> ACK SOM 0 0xFFF0<CR>
— Table 13 — Get/Set Output Mute Syntax Example
Example Command
GOMM<CR>
SOMM 0<CR>
— Table 14 — Get/Set Output Master Mute Syntax Example
Example Command
GOV 9<CR>
SOV 9 0<CR>
— Table 15 — Get/Set Output Volume Syntax Example
Example Command
GOMV<CR>
SOMV 9 0<CR>
— Table 16 — Get/Set Master Output Volume Syntax Example
Example Command Example Response
ACK GOM 14 ON<CR>
ACK SOM 14 0<CR>
ACK GOM 0 0xFFFF<CR>
Example Response
ACK GOMM ON<CR>
ACK SOMM 0<CR>
Example Response
ACK GOV 9 -30<CR>
ACK SOV 9 0<CR>
ACK GOV 0 -2 -3 0 ... -1<CR>
Example Response
ACK GOMV -3<CR>
ACK SOMV -3<CR>
15
Description of Response
Description of Response
Description of Response
2
Description of Response