Download Print this page

Nokia Go Manual page 13

Advertisement

Your Nokia Go has an autonomy of up to 8 months using a CR2032 battery. If you need to
replace the battery, perform the following steps:
1. Turn it over so that you can see the back case cover.
2. Place the tool provided with the Nokia Go in the groove of the back case and turn
counterclockwise so that the marking at the top of the back case is in line with the dot.
Alternatively, you can use a coin to do so. If you do so, be careful not to damage the groove.
3. Replace the battery.
4. Make sure the O-ring is still in place as it is what allows your Nokia Go to be waterproof.
5. Put the cover back in place.
6. Use the tool to lock the cover in place by turning clockwise.

Advertisement

loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Wam02