Getting Started - Glowforge Compact Filter User Manual

Manufacturer's label
Getting Started
Now that you've read all about Safety, you're ready to get lasering!
Unboxing will take just a few minutes – we can't wait for you to get started either. Of course, if you
encounter any challenges along the way, our Customer Success team can be reached at
support@glowforge.com​
Let's get started, shall we?
Check for damage
If your packaging or any part of your Compact Filter shipment is visibly damaged on arrival,
we want to make it right as soon as possible! Send photos of the damage to
support@glowforge.com and wait until you hear back from us. If the Compact Filter itself is
visibly damaged, do not plug it in or attempt to operate it; contact us immediately.
Unbox your Compact Filter
Locate your Compact Filter.
Your Compact Filter must be on a flat surface, like the floor. It needs to be positioned so
that the 8 foot exhaust hose can connect to the back of your Glowforge while making no
more than three 90-degree bends.
Your Compact Filter blows air out, so ensure that there are no obstructions within two
inches of the vents on either side.
Copyright Glowforge, Inc. 2018
Rear view of unit
to help.
7