Before You Start; Electrical Safety - Glowforge Compact Filter User Manual

Safety
Now, it's time to be serious. Improperly operating the Compact Filter unit can cause fire and
health hazards. These can result in serious injury or even death.

Before you start

● Read this manual before using your Compact Filter, and ensure everyone else who uses it
reads this too.
● Always follow all instructions in this manual, in the Glowforge Manual and in the Glowforge
App.
● Use the Compact Filter only with a Glowforge Basic, Plus, or Pro.
● Children require the supervision and assistance of an adult at all times.
● This product may be subject to regulations and standards, particularly when installed in an
educational institution or place of work. Ensure that you comply with all applicable rules.
Electrical Safety
To reduce the risk of electric shock or fire:
● Do not try to service, repair, or modify the Compact Filter in a manner not described in this
manual.
● Do not open any sealed portion of the Compact Filter or try to access the wiring. Damage
caused by opening the case is not covered by the warranty.
● If the Compact Filter or its power cord is damaged, unplug the power cord and contact
support@glowforge.com​
● In the event of any emergency or malfunction, unplug the power cord on the back of the
unit.
● Use only a properly grounded 120 VAC outlet that meets local building codes.
● The Compact Filter may draw up to 3 amps. Ensure that the circuit can support at least a
350 watt load. Note: a standard 15A household outlet can support both a Glowforge printer
and a Compact Filter if nothing else is drawing power from the circuit.
Copyright Glowforge, Inc. 2018
immediately.
3