Glowforge Compact Filter User Manual page 17

Turn off your Compact Filter when you are done printing.
Use the switch next to the power cable to turn off the Compact Filter when the Glowforge
software interface indicates that the print is complete.
Materials will have an odor when they're removed. If you prefer, you can reduce this odor by
leaving your Compact Filter running for longer after the print is complete.
Cleaning, Service & Moving
Unplug your Compact Filter off before cleaning, moving, changing the filter cartridge, or doing any
other cleaning or maintenance.
Change Filter Cartridge
When you detect smells during printing even when the Compact Filter dial is set to "Full", it's time
to change the filter cartridge. Here's how.
Turn off and unplug your Compact Filter
The power switch is located on the back, next to the cord. Turn it off first, then unplug it
from the wall.
Open Compact Filter
There are four latches holding the top of the Compact Filter in place. Lift the bottom of all
four latches to release them. You do not need to remove the exhaust hose to change the filter
cartridge.
Remove and dispose of old filter cartridge
Grab and lift the two fabric handles to remove the filter cartridge from the Compact Filter.
Dispose of the used filter cartridge in the garbage.
Copyright Glowforge, Inc. 2018
17