Ozone Explore V2 Manual
  1. Manuals
  2. Brands
  3. Ozone Manuals
  4. Aircrafts
  5. Explore V2
  6. Manual

Ozone Explore V2 Manual

Depower foil
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Explore V2 and is the answer not in the manual?

Questions and answers

Related Manuals for Ozone Explore V2

Summary of Contents for Ozone Explore V2

  • Page 2: Warranty

    Ozone or expense that you or any users of your Ozone product may suffer, or that your next of kin may suffer, as kite will enjoy a long life, with consistent handling, performance www.flyozone.com to register your kite)
  • Page 3 WARNINGS READ THE FOLLOWING POINTS BEFORE ASSEMBLING YOUR KITE: CHOOSE A SAFE LOCATION: USE CAUTION WITH FLYING LINES: WARNING: supplied with this kite as other brands bars are not compatible with this design, therefore the Release System will NOT work. tension and can cause serious injury or death.

  • Page 4: Wind Window

    WIND SET-UP DESCRIPTION FORCE KNOTS MPH METRES/SEC <1 <1 <0-0.2 <1 Calm: Smoke rises vertically. Go Paragliding! 0.3-1.5 Light air: Smoke drift shows wind direction. It’s coming - get large size kites ready. 1.6-3.3 6-11 Light breeze: Wind felt on face, leaves rustle. Kite: cruising with buggy/mountain board/ski/snowboard. Experts hydro foiling. Gentle wind: Leaves in motion, light flags extended.
  • Page 5 In all situations make sure that all lines are clear of all working release systems and the kite leash is connected in the right way. IMPORTANT: ALL OZONE RELEASE SYSTEMS REQUIRE THE USER TO OPERATE THEM MANUALLY IN THE CASE OF AN EMERGENCY. IT IS IMPERATIVE THE KITE IS SET-UP AS SHOWN IN THE MANUAL, INCORRECT SETUP WILL COMPROMISE THE OPERATION OF THE connected.)
  • Page 6 SECURITY SECURITY WARNING: NEVER FLY YOUR KITE IN STRONG WIND FOR THE 1ST TIME. DO NOT ATTEMPT TO STAGE OF RELEASE FLY A KITE WITHOUT BEING TAUGHT BY A CERTIFIED KITE INSTRUCTOR. RELOADING THE LEASH LIGHT WINDS edge directly into the wind with sand/snow to secure kite.

  • Page 7: Maintenance

    LANDING OPTION 3: STRONG WINDS CONTINUED CLAMCLEAT TRIMMER LEADER LINE TRIMMING KNOTS and down to unlock the line from the teeth, then set the trimmer line to the desired amount. Pull the trimmer line down to de-power the kite. This is needed if you are overpowered, for unhooked riding, or if you are walking on the beach or snow.
  • Page 8 PACKING inside. Avoid folding close to the leading edge if your kite has plastic reinforcements there. D E P O W E R F O I L M A N U A L...

Table of Contents