EFI VUTEk 3r Series Maintenance Manual page 38

6.0 Every 40 Hours
The following maintenance tasks must be performed every 40 hours of production.
6.1 Clean the free-fall rollers.
PPE Items:
GLOVES NITRILE DISPOSABLE BOX LARGE
SAFETY GLASSES
Required Items:
WIPES 9X9 CLEAN ROOM
ROLL CONDITIONING FLUID
How-to Video:
Directions:
1. Remove any media.
2. Open the printer hood and insert the retaining pins into the LH and RH Pin sockets.
3. Using a lint-free wipe dampened in roll conditioning fluid, thoroughly wipe down all free-fall rollers,
4. Remove the retaining pins after completing tasks.
Document ID: OMM-00144-L
CLICK TO PLAY
Figure 6-1 Free Fall Rollers
VUTEk 3r & 5r Series Maintenance Guide
Every 40 Hours
Figure 6-1.
38