Advertisement
3.
Wipe down lamp lenses with a lint-free wipe and isopropyl alcohol.
4.
If there are particles stuck to the glass, carefully remove them using a
scraper with blade,
Figure
Caution: Avoid scratching lamp lens surfaces; do not touch the lens surface.
NOTE: Scraper style may vary based on date of printer installation.
5.
Remove the retaining pins after completing tasks.
Document ID: OMM-00144-L
4-12, then wipe both surfaces again.
Figure 4-12 Scraping LED lens surface, (Left) and Scraper (Right)
VUTEk 3r & 5r Series Maintenance Guide
Every 8 Hours
Figure 4-11 Wiping LED Lens surface
30
Advertisement
