Maintenance / Care Instructions - Glow Fire Bio Burner 24 User Manual And Safety Instructions

IMPORTANT: Never pour ethanol into the flame!
IMPORTANT: Allow the burner to cool down for at least 30 minutes before refilling!
Do not fill up the ethanol fuel while there is flame or heat in the burner.
Clear:
- If possible, let the fuel burn out completely. This prevents alcohol from remaining in the tank
and disappearing when it is ignited again.
- If you want to extinguish the flame before the fuel is completely used up, use the slides pro-
vided to close the burner opening.
- Use only the sliders supplied with this device, never use a wooden or plastic tool and never
your bare hands.
- The valve must always be fully open during operation so that no pressure can build up inside
the burner.
To extinguish the fire, quickly pull the slide to the front of the burner. If the fire is not extin-
-
guished, open the slider again and repeat the extinguishing process
IMPORTANT: Never extinguish the flame with water!

Maintenance / care instructions:

- Discoloration may form on the top of the burner after use. This is normal and not a reason
for complaint.
- The chimney and the burner chambers must be cleaned regularly. Use warm water and a
gentle detergent.
- Stains can best be removed with a soft cloth and a mixture of lukewarm water and a small
amount of cleaning liquid (pH neutral). Dust can be removed with a dry cloth.
- Please use a special sand-free stainless steel cleaner for the stainless steel surfaces. We rec-
ommend cleaning the stainless steel container regularly to avoid contamination.
3