Advertisement
1. Prepare solution by adding 8 oz (
(
)
or equivalent dilution
2. Mix well and use immediately
3. Soak removed parts for 30 minutes in solution
If parts could not be removed from the appliance, then add cleaning solution to a soft cloth
and use it to coat appliance parts and let sit for 30 minutes
1 Prepare solution by adding 0.5 oz (
water
2. Mix well and use immediately
3. Soak parts in solution for 1 minute
If parts could not be removed from the appliance, then add sanitizing solution to a soft cloth
and use it to coat appliance parts and let sit for 1 minute
4. Remove parts from solution and allow to drain and dry completely
Do NOT rinse or apply water.
If parts were not removed from the appliance, wipe with a clean soft cloth and let air dry
1. Prepare a solution of 4 mL of Urnex
2. Spray exterior surface of appliance and allow solution to remain on surface for 1 minute
3. Wipe away with clean cloth and allow to fully air dry
These can be used to wipe down any components of the brewer that cannot be easily removed
These can be used during cleansing brews to clean the bottom of the pod holder and exit needle
Cleaning & Sanitizing Procedure
Cleaning Solution
) of Urnex
240 ml
Sanitizing Solution
) of Urnex
15 mL
Sanitizing Spray for Machine Surfaces
®
Complete Café Sanitizer to 1 L of water in a spray bottle
Urnex
Urnex
®
Rinza concentrate to 1 gallon (
®
Complete Café concentrate to 1 gallon (
®
Café Wipz
®
Cleaning Pods
6
) of warm tap water
3.5 L
) of warm tap
3.7 L
(
)
as needed
Advertisement
