Cleaning & Sanitizing Procedure; Cleaning Interior & Exterior Components - Keurig ECCELLENZA TOUCH Manual

1. Prepare solution by adding 8 oz (
).
lent dilution
2. Mix well and use immediately.
3. Soak removed parts for 30 minutes in solution.
4. Empty bucket and set aside parts to prepare sanitizing solution per the instructions below.
If sanitizing procedure will not be performed, rinse well under clean running water and allow parts to drain and
dry completely.
NOTE: For non-removable parts, add cleaning solution to a soft cloth and use it to coat appliance parts. Then let
sit for 30 minutes prior to wiping down with sanitizer solution.
1. Prepare solution by adding 0.5 oz (
ter.
2. Mix well and use immediately.
3. Soak parts in solution for 1 minute.
4. Remove parts from solution and allow to drain and dry completely.
Do NOT rinse or apply water.
If parts were not removed from the appliance, wipe with a clean soft cloth and let air dry.
NOTE: For non-removable brewer parts and to use on all parts in between sanitizing soaks.
1. Prepare a solution of 4 mL of Urnex
2. Spray exterior surface of appliance and allow solution to remain on surface for 1 minute.
3. Wipe away with clean cloth and allow to fully air dry.
These can be used to wipe down any components of the brewer that cannot be easily removed
Cleaning & Sanitizing Procedure
Cleaning Solution
®
) of Urnex Rinza concentrate to 1 gallon (
240 ml
Sanitizing Solution
NOTE: Parts must be cleaned prior to sanitizing.
®
) of Urnex Complete Café concentrate to 1 gallon (
15 mL
Sanitizing Spray for Machine Surfaces
®
Complete Café Sanitizer to 1 L of water in a spray bottle.
®
Urnex Café Wipz
11
) of warm tap water (
3.5 L
) of warm tap wa-
3.7 L
or equiva-