Download Print this page
Roca IN-WASH INSPIRA SMART CC BTW A80306100R Installation Manual
Roca IN-WASH INSPIRA SMART CC BTW A80306100R Installation Manual

Roca IN-WASH INSPIRA SMART CC BTW A80306100R Installation Manual

Smart toilet

Advertisement

Quick Links

IN-WASH® INSPIRA
SMART TOILET CC BTW
A80306100R

Advertisement

loading
Need help?

Need help?

Do you have a question about the IN-WASH INSPIRA SMART CC BTW A80306100R and is the answer not in the manual?

Questions and answers

Summary of Contents for Roca IN-WASH INSPIRA SMART CC BTW A80306100R

  • Page 1 IN-WASH® INSPIRA SMART TOILET CC BTW A80306100R...
  • Page 3 - Before installation, read this installation manual thoroughly and the included safety precautions. Parts must be installed according to the instructions. - Rain water or grey water is not suitable to operate this equipment. The In-Wash shower toilet may only be operated with normal drinking water. - Do not damage electrical connection components.
  • Page 4 [mm] Alternative drainage connections Included Min. 125 Max. 225...
  • Page 5 3/8” M - 1/2” H 1/2” H - 3/4” H 1/2” H - 3/8” H...
  • Page 6 Do not use rain water. Pipes Use only potable water. Option Option 500 kPa Ø1/2” Ø1/2” Electrical Option Option 3 x 1mm L = 300 mm ØMin: 6 mm ØMax: 8,5 mm...
  • Page 7 25A lDn 0.03A 10 ó 15A According to current legislation Mandatory 3 x 1mm L Min. = 300 mm ØMin: 6 mm ØMax: 8,5 mm 240 VAC 50 Hz. 1700 W Max. The electrical installation must be protected by means of a IDn 0,03A and 25A differential switch and a magnetothermal switch of 10 or 15A.
  • Page 8 Ø12 ~250 ~360 Min. 45...
  • Page 9 Water filter support Install the water filter on the most accessible side...
  • Page 10 External connection 3/8” M - 1/2” H L = 610 1/2” H - 3/4” H L = 515 1/2” H - 3/8” H 3/8” M - 1/2” H 3/8” H - 1/2” H L = 560 1/2” H - 3/4” H...
  • Page 11 L Min. = 300 mm Fase Plus Phase Fáze Tierra Ground Terra Terre Uziemienie Schutzleiter Neutro Neutral Neutro Neutre Zero Neutralleiter...
  • Page 12 Option Included Note: Dual check valve must be fitted before cistern stop. 1/2” H - 3/8” H...
  • Page 13 Internal connection 3/8” M - 1/2” H 1/2” H - 3/4” H...
  • Page 14 Gray Blue 4.5L...
  • Page 19 X = 2mm X = 3mm X = 4mm Max. 1mm CR 2032 (x2) Included Optional...
  • Page 20 A beep will be heard and all the LEDs on the remote light up, as a signal that it is connected. A self-calibration process starts for 120 seconds during which water flows from the e-bidet nozzle window. See user manual Roca Sanitario, S.A. Avda. Diagonal, 513 08029 Barcelona SPAIN...

This manual is also suitable for:

In-wash inspira smart cc btw a80306l00r