Advertisement
3. Micro-SD card (optional)
Lightly press the card holder and push it carefully toward SIM card holder until
it unlocks. The card holder can now be flipped up vertically. Place the memory card
in the plastic bracket. Make sure that the memory card contacts face down and that
the card is placed in formed area area. Do not scratch or bend the card contacts.
Push the metal holder back down, press it flat and slide it until it snaps into place.
4. Insert the battery (required)
Push it into the battery compartment ensure that the three contacts on the battery
touches the three spring contacts in the battery compartment.
5.
Replace the cover and press it all the way around to make sure it is
closed
When battery performance is low, the empty battery symbol flashes. To
recharge the battery, connect the mains adapter to the micro USB connector on the
bottom side of the phone. Alternatively you can place the telephone in the charge
cradle connected to the mains adapter via the USB cable.
During charge, the red charge LED is on. The battery charge icon moves
during charge (visible in the upper right corner of the display). It takes approximately
3 hours to fully charge the battery. When fully charged the charge icon stops moving.
Power on the phone
Press and hold the red key on the phone at least 2 sec. to turn it on and off.
If the SIM card is valid and protected with a PIN code (Personal Identification
Number), Enter PIN is displayed. Enter the SIM PIN code and press OK ( upper left
corner of keypad). Delete with Delete ( upper right corner of keypad).
Set the language
By default the phone's menu language is determined by the SIM card. You
can always switch between the languages supported by the phone.
1. Press Menu - Settings - OK.
2. Select Phone settings - OK.
3. Select Language - OK.
4. Select language from the list - OK.
Advertisement
