Download Print this page

Specifications; Install The Sim Card And The Battery - Doro Primo 366 User Manual

Advertisement

11. Cradle charging contacts
12. Micro-USB port - For charger
13. Headset socket - For 3.5 mm standard headset
14. Torch LED
15. Camera lens
16. Loudspeaker
17. Assistance key
18. Torch key - Switch torch on and off
19. Keypad lock - lock/unlock
20. + and - keys - Adjust ring volume and loudspeaker volume
21. LEDs - Blue = battery full; Red = battery charging

Specifications

Network: GSM 900/1800/1900 (Triband) MHz
Dimensions: 119 mm x 56 mm x 12 mm
Weight: 88 g
Battery: 3.7V/1000 mAh Li-ion battery
Operating ambient temperature: Min: 0°C (32°F) Max: 40°C (104°F)
Charging ambient temperature: Min: 0°C (32°F) Max: 40°C (104°F)
Storage temperature: Min: -20°C (-4°F) Max: 60°C (140°F)

Install the SIM card and the battery

The SIM card holder is located inside the battery compartment.
1. Remove the cover
Slide your fingernail into the small notch on the bottom side of the phone and
pull the cover upward.
If the battery is installed, slide your fingernail in the notch below the
Assistance key to lift it up.
2. Insert the SIM card (required)
Insert the SIM card by carefully slide it under the metal bracket. Make sure the
contacts on the SIM card face down and the cut off corner is positioned according to
the figure. Do not scratch or bend the card contacts. Try not to touch the contacts
with your fingers.

Advertisement

loading