Drolet Heat Commander Installation And Operating Instructions Manual page 12

Clearances with single wall pipe
3.3.1
14.25" (362 mm) (from the
A
back of the blower box)
B
C
D
E 69" (175 cm) minimum
F
G
H¹ 24" (610 mm) minimum
I
¹A minimum clearance to the left is required for maintenance or replacement of
components, however, a larger clearance is suggested.
Clearances with double wall connector
3.3.2
(The use of a single wall pipe assembly with a heat shield certified to
6 "combustible materials, can be used. Only in this case, the same
clearances apply as with a certified double pipe.)
6.75" (171 mm) (from the
A
B¹
C
D
E
F
G
H²
I
¹Recommended clearance, otherwise use the clearance provided by the double wall
black pipe manufacturer.
²A minimum clearance to the left is required for maintenance or replacement of
components, however, a larger clearance is suggested.
CANADA
18" (457 mm)
5" (127 mm)
0" (0 mm)
12'' (305 mm)
1'' (25 mm)
11" (279 mm)
CANADA
back of the blower box)
11.5" (292 mm)
5" (127 mm)
0" (0 mm)
69" (175 cm) minimum
12'' (305 mm)
1'' (25 mm)
24" (610 mm) minimum
11" (279 mm)
É.-U.
14.25" (362 mm) (from the back
of the blower box)
18" (457 mm)
5" (127 mm)
0" (0 mm)
69" (175 cm) minimum
12'' (305 mm)
1'' (25 mm)
24" (610 mm) minimum
11" (279 mm)
É.-U.
6.75" (171 mm) (from the back
of the blower box)
11.5" (292 mm)
5" (127 mm)
0" (0 mm)
69" (175 cm) minimum
12'' (305 mm)
1'' (25 mm)
24" (610 mm) minimum
11" (279 mm)