Subscribe to Our Youtube Channel
Related Manuals for DediProg SF Series
Summary of Contents for DediProg SF Series
- Page 1 DediProg FAQ Manual 06/2018 SF Series Frequently Asked Questions Version 1.1 © DediProg Technology Co., Ltd 2018 All Rights Reserved.
- Page 2 I. Hardware Initialization Failed： Q1. Software appears a "Hardware Initialization Failed" error message. Step1: If driver installation failed, please refer to SF Series User Manual: 2.2 USB Installation. Step2: Confirm the Power LED light is on. Step3: Confirm the programmer is connected to the PC directly.
- Page 3 Make sure the power is coming from a single source; either the programmer or the board. The electric power can be segregated by diode. The SPI signal that connects to the board must be high impedance. www.dediprog.com...
- Page 4 IO3 of the programmer. The IO3 will send the LOW level signal to ensure the power only provides to IC programming. If the above Q&A did not solve your problems, please provide the following information to support@dediprog.com Programmer Type (SF100/SF600/SF600Plus) Chip Type...
- Page 5 209 E Baseline RD, Suite E208 #8, Tempe, AZ, 85283, USA Technical Support: support@dediprog.com Sales Support: sales@dediprog.com Information furnished is believed to be accurate and reliable. However, DediProg assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties which may result from its use.
Need help?
Do you have a question about the SF Series and is the answer not in the manual?
Questions and answers