Basic Operation - Samsung Galaxy Feel2 Instruction Manual

Lock screen
a
b
c
d
Lock screen (example)
a Clock widget
b Notification information
c Lock canceling button *
d Camera activating button
e Machi-chara (example: my daiz)
• Notify you of information such as mail reception or incoming call.
f my daiz button
*
• Activate my daiz.
* Appears only when the Home application is set to "docomo LIVE UX".
Information
• You can set to not display the notification information on the lock
screen (P.113).
• You can change the unlock method of the screen lock (P.113).
You can operate the terminal variously with touch screen and motions.
• Do not contact the touch screen with electric materials or metallic
• The touch screen might not operate when you use the terminal while
• Do not cover the antenna section with your hand when operating the
e
■
f
You can operate the touch screen (display) of the terminal by directly touching
with your finger. In this manual, main operations are described as follows.
28
Basic Operation
materials. The terminal might not operate well due to static electricity.
charging. In that case, remove the terminal from the charger.
terminal while holding it.
Using touch screen
Notes on using the touch screen
• Touch screen is designed for being touched lightly with fingers. Do
not push it forcibly with a finger or press it with sharp objects (a nail,
ballpoint pen, pin etc.).
• The touch screen may not work in the following cases. Note that such
operations may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation when the touch screen is wet
- Operation with finger wet by sweat or water
- Operation under water
■ Tap/Double-tap
Touch a displayed item or icon lightly with your
finger to select/perform (Tap).
Tap twice quickly on a displayed image or web
page to zoom in/out the contents (Double-tap).
■ Touch and hold
Touch and hold a displayed content or item for 1
second or longer to display menu etc.
Before using the terminal