Table of Contents
Advertisement
Trouble
No caller ID is
• Even though a caller notifies the caller ID, it is
notified/A notified
not displayed on the terminal if the network or
caller ID is different
network operator does not notify the ID. And, a
from that of the
notified caller ID may be different from that of the
caller/ Functions
caller by some networks or network operators you
using contents saved
use.
in phonebook or
Caller ID notification
do not operate
Data management
‡
Trouble
Data transfer is
• Do you use USB HUB? If you use USB HUB,
not performed
operations may not be performed correctly.
Data saved in
• Mount microSD card. → P.111
microSD card is
• Remove and attach microSD card. → P.24
not displayed
Image is not
•
may appear if image data is broken.
displayed
No operation is
• Install Galaxy Smart Switch or Windows Media
performed even
Player 10 or later to a PC.
by connecting the
terminal to a PC
appears on the
• It appears when available space of the system
status bar.
memory (terminal) is low. If you use the terminal
with this condition, some functions or apps
may not work. Delete app or data such as
media contents, etc. to ensure available space.
→ P.48, P.129
Check and remedy
Check and remedy
Bluetooth
‡
Trouble
Cannot connect to
• Make the Bluetooth device (commercial item)
Bluetooth device/
registration stand-by state first and register the
Bluetooth device
device on the terminal. If you register the device
cannot be found by
again after deleting the registration, delete the
scanning
registrations on both Bluetooth device and the
terminal, and then newly register the device.
Cannot call from
• If calls are made several times when the other
the terminal with
party does not answer or is out of service, the call
external device
to this number may be disabled. In this case, turn
connected such as
the terminal OFF and ON.
a car navigation or
hands-free device.
Maps/GPS function
‡
Trouble
Cannot set AUTO-
• Is AUTO-GPS disabled because battery is
GPS service
low? If AUTO-GPS is disabled due to "Low-
information
power operation settings", AUTO-GPS service
information cannot be set. In this case, set "Low-
power operation settings" for "AUTO-GPS" to
"Not suspend" or charge the battery. → P.26,
P.122
• Is "AUTO-GPS operation settings " for "AUTO-
GPS" turned OFF? → P.122
143
Check and remedy
Check and remedy
Appendix/Index
Advertisement
Table of Contents
