Buttons; Device Mimic - 3Com Baseline 2816 User Manual

24 C 3: C
HAPTER ONNECTING TO THE
Table 7 Available Menu Items
Menu Item Description
Summary Provides a summary of the Switch's basic
settings and versions of current compo-
nents
Password Allows you to change the administrator
password
IP Settings Allows you to configure the IP address
settings of the Switch
Port Configuration Allows you to configure the Switch's
port settings
VLANs Allows you to create VLAN groups, add
port members, and specify how VLAN
tagging is used
Link Aggregation Allows you to set up and maintain trunk
membership for port groups
Port Mirroring Allows you to perform port traffic moni-
toring on the Switch. To monitor a port,
you will also need a network analyzer.
Traffic Prioritization Allows you to configure traffic prioritiza-
tion for IP phones that are connected to
the Switch
Cable Diagnostics Allows you to detect and resolve cable
issues
System Tools Allows you to perform various system
maintenance tasks, such as upgrading
the firmware, resetting the Switch, back-
ing up and restoring configuration, and
enabling 802.11p prioritization.
W I
EB NTERFACE
Menu Item Description
Support Displays 3Com contact information and
describes how to use the online help sys-
tem
Log Out Allows you to securely log off the Web
interface

Buttons

Depending on the page that is currently displayed, the
following buttons may appear:
Apply – Click to save and apply any changes that
■
you have made
Cancel – Click to discard any unsaved changes
■
Help – Click to display the context-sensitive help
■
information for the page that is currently displayed.
The help pages provide information on the tasks that
you can perform on each interface page.

Device Mimic

At the bottom of each page is an image of the Switch's
front panel, which indicates ports that are currently in
use.
To configure a port, click the port on the image. This
takes you to the Basic Port Configuration tab, where
you can:
Assign a name (or label) to the port
■
Enable or disable the port
■