Sample Vlan Configurations - 3Com Baseline 2816 User Manual

3com baseline 2816: user guide
Hide thumbs Also See for Baseline 2816:
Table of Contents

Advertisement

happens, you will need to reset the Switch to factory
settings.
To create a VLAN:
1
On the menu, click VLANs. The VLANs page appears.
2
In VLAN ID, click Create New VLAN.
In VLAN ID (1-4094), type an unused ID number for the
3
VLAN that you are creating. VLAN IDs range from 1 to
4094.
Figure 15 Create VLANs Page
4
Define the VLAN membership by setting the state of
each port. To change states, click the icon under the
port number repeatedly to cycle through the different
states. Available states include:
N – Not a member
U – Uplink egress packets
D – Desktop egress packets
Click Apply to create the VLAN.
5
For examples on setting up VLANs, refer to "Sample
VLAN Configurations" on page 35.

Sample VLAN Configurations

To illustrate how you can segment network devices that
are connected to the Switch, the following sample
configurations are provided.
Setting Up Two VLANs on the Same Switch
Figure 16 illustrates how you can set up a simple VLAN
on the Switch using desktop connections.
Configuring VLANs
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents