Sony HT-S200F Service Manual

2021/02/16 22:34:59 (GMT+09:00)
HT-S200F/SF200/SF201
SERVICE MANUAL
Ver. 1.2 2021.02
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus aff ected unit was found during
service, contact your Service Headquarters.
Bar Speaker
Amplifier section
S200F: US
POWER OUTPUT AND TOTAL HARMONIC
(FTC)
POWER OUTPUT (reference)
Except S200F: US, CH
POWER OUTPUT (rated)
POWER OUTPUT (reference)
S200F: CH
Inputs
Outputs
USB section
BLUETOOTH section
Communication system
Output
9-896-481-03
2021B33-1
©
2021.02
DISTORTION:
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 - 20,000 Hz; rated
15 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
Front L/Front R speaker: 25 W (per
channel at 4 ohms, 1 kHz)
Subwoofer: 30 W (at 4 ohms, 100 Hz)
Front L + Front R: 20 W + 20 W (at
4 ohms, 1 kHz, 1% THD)
Front L/Front R speaker: 25 W (per
channel at 4 ohms, 1 kHz)
Subwoofer: 30 W (at 4 ohms, 100 Hz)
TV IN (OPTICAL)
USB
HDMI OUT (TV (ARC))
(USB) port:
Type A (For connecting USB memory)
BLUETOOTH Specification version 4.2
BLUETOOTH Specification Power
Class 1
Sony Home Entertainment &
Sound Products Inc.
SPECIFICATIONS
Maximum communication range
1)
Line of sight approx. 25 m
Frequency band (Except S200F: CH)
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Maximum output power (SF200/SF201)
≤ 6 dBm
Modulation method
FHSS (Freq Hopping Spread Spectrum)
2)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
3)
Supported Codec
4)
SBC
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
S200F: CH
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
Speaker section
Speaker system
2-Way 3 Drivers Speaker System, Bass
reflex
Speaker
Front L/Front R speaker: 46 mm (1 13/
16 in) cone type
Subwoofer: 70 mm (2 7/8 in) cone type
US Model
Canadian Model
E Model
Chinese Model
AEP Model
HT-SF200/SF201
UK Model
General
Power requirements (Except S200F: LA)
DC 19.5 V (using the supplied AC
adapter connected to AC 100 V - 240 V,
50 Hz/60Hz power supply)
S200F: LA
Requisitos de alimentación
cc 19,5 V 4,36 A
(con adaptador de ca/cc)
Datos de alimentación del adaptador de
ca/cc
Entrada: ca 100-240 V 50/60 Hz 1,0 A
Salida: cc 19,5 V 4,36 A
Power consumption
On: 25 W
Standby mode: 0.5 W or less (Power
Saving mode)
(When Control for HDMI function and
BLUETOOTH Standby mode are set to
off)
Standby mode: 2 W or less*
(When Control for HDMI function and
BLUETOOTH Standby mode are set to
on)
* The system will automatically enter
Power saving mode when there is no
HDMI connection and no
BLUETOOTH pairing history.
Dimensions* (approx.) (w/h/d)
580 mm × 64 mm × 95 mm (22 7/8 in ×
2 5/8 in × 3 3/4 in)
* Not including projection portion
Mass (approx.)
2.3 kg (5 lb 2 oz)
– Continued on next page –
SOUND BAR
HT-S200F
HT-SF200
SYS SET