Loudspeaker (46 Mm) (Front L-Ch Speaker)-2 - Sony HT-S200F Service Manual

2-11. LOUDSPEAKER (46 mm) (FRONT L-CH SPEAKER)-2

Note 2: When connecting the terminals of the front speaker connection cable (L-ch) to the loudspeaker (46 mm) (front L-ch speaker),
check the direction of the terminals before installing.
OK
NG
terminal (wide)
[red]
4 loudspeaker (46 mm) (front L-ch speaker)
Note 1: When installing the loudspeaker (46 mm)
(front L-ch speaker), check the position of
the terminals and align the two bosses and
two holes.
1 three flat head screws
(3.6 10)
1 flat head screw
speaker installing hole
left side
loudspeaker (46 mm)
(outer side)
(front L-ch speaker)
cabinet
(bottom)
block
Insert the terminal (wide: red) side
to upper left position of the speaker
installing hole.
left side
loudspeaker
(46 mm)
(front L-ch speaker)
front side
2 Pull out the speaker block (L-ch)
left side
3 terminal (wide)
boss
[red]
3 terminal (narrow)
hole
[black]
hole
(3.6 10)
front speaker connection
cable (L-ch)
front side
Press the front speaker connection cable
(L-ch) to the bottom side of the cabinet
(bottom) block, and insert the loudspeaker
(46 mm) (front L-ch speaker).
(Position the cable to the lower side of the
loudspeaker)
front speaker connection cable (L-ch)
terminal (narrow)
[black]
in the direction of the arrow.
boss
front side
cabinet (bottom) block
loudspeaker (46 mm)
top side
(front L-ch speaker)
cabinet
(bottom)
block
front side
HT-S200F/SF200/SF201
OK
NG
front speaker connection
cable (L-ch)
Install the loudspeaker (46 mm) (front
L-ch speaker) and front speaker
connection cable (L-ch) as above figure,
pull out the front speaker connection
cable (L-ch) in the direction of the arrow.
top side
right side
right side
15
SYS SET