Loudspeaker (46 Mm) (Front R-Ch Speaker) - Sony HT-S200F Service Manual

HT-S200F/SF200/SF201

2-12. LOUDSPEAKER (46 mm) (FRONT R-CH SPEAKER)

Note 2: When connecting the terminals of the front speaker connection cable (R-ch) to the loudspeaker (46 mm) (front R-ch speaker),
check the direction of the terminals before installing.
OK
NG
terminal (wide)
[red]
left side
cabinet (bottom) block
1 flat head screw
(3.6 10)
speaker installing hole
left side
(inner side)
Insert the terminal (narrow: black) side
to lower right position of the speaker
installing hole.
16
left side
loudspeaker (46 mm)
(front R-ch speaker)
front side
3 terminal (wide)
[red]
hole
hole
1 three flat head screws
(3.6 10)
front speaker connection
cable (R-ch)
loudspeaker (46 mm)
(front R-ch speaker)
cabinet
(bottom)
block
front side
Press the front speaker connection cable
(R-ch) to the bottom side of the cabinet
(bottom) block, and insert the loudspeaker
(46 mm) (front R-ch speaker).
(Position the cable to the lower side of the
loudspeaker)
front speaker connection cable (R-ch)
terminal (narrow)
[black]
front side
2 Pull out the speaker block (R-ch)
in the direction of the arrow.
top side
boss
right side
boss
3 terminal (narrow)
[black]
4 loudspeaker (46 mm) (front R-ch speaker)
Note 1: When installing the loudspeaker (46 mm) (front R-ch speaker),
check the position of the terminals and align the two bosses
and two holes.
top side
left side
cabinet
(bottom)
block
OK
NG
front speaker connection
cable (R-ch)
loudspeaker (46 mm)
(front R-ch speaker)
front side
Install the loudspeaker (46 mm) (front
R-ch speaker) and front speaker
connection cable (R-ch) as above figure,
pull out the front speaker connection
cable (R-ch) in the direction of the arrow.
SYS SET