Touch Board - Sony HT-S200F Service Manual

HT-S200F/SF200/SF201
2-4.

TOUCH BOARD

1 Gradually peel off the TOUCH board from
cabinet (top) with a flathead screwdriver, etc.
Note 2: The TOUCH board is affixed to the
cabinet (top) with a strong adhesive sheet.
When removing the TOUCH board,
remove slowly so that you do not damage
the rib, etc. of the top cabinet.
TOUCH board
rib
flathead screwdriver, etc.
8
4 TOUCH board (See Fig. B)
Note 3: When installing the TOUCH board,
cabinet (top)
rib
left side
top side
adhesive (VK)
TOUCH board
(switch side)
guide line
align the two bosses and two holes.
hole
hole
rib
boss
Note 1: Lay a soft piece of cloth under the
cabinet (top) to avoid damaging
the cabinet (top).
hole
TOUCH board block
boss
–
2 Draw the TOUCH board
block out of the two ribs
in cabinet (top).
3 adhesive (VK)
rib
front side
cabinet (top)
boss
right side
rib
–
SYS SET