Configuring Static Routes - 3Com 3CR13501-73 Hardware And Software Manual

Configuring the Security Switch 6200 System
Configuring
Static Routes
3COM Security Switch 6200 Hardware and Software Users Guide
Static IP routes are user-defined routes that cause packets moving between a
source and a destination to take a specific path.
To configure Static Routes:
1. Select Option 11 from the main menu.
Static Routes
=============
Destination
2. Enter the desired option to add, delete, or modify a static route or enter
x to return to the main menu. For example:
Modify the Static Routes <Add, Delete, Modify or
eXit>[eXit]: a
Enter Destination [0.0.0.0/0]: 10.0.0.0
Enter Network Mask in dot notation [0.0.0.0]: 255.0.0.0
Enter the Next Hop Gateway [0.0.0.0]: 189.168.10.1
Enter the Metric [1]:
Static Routes
=============
Destination Netmask
10.0.0.0 255.0.0.0
Modify the Static Routes <Add, Delete, Modify or
eXit>[eXit]: a
Enter Destination [0.0.0.0/0]: 192.168.20.0/24
Enter the Next Hop Gateway [0.0.0.0]: 192.168.10.1
Enter the Metric [1]: 2
Static Routes
=============
Destination Netmask
10.0.0.0 255.0.0.0
192.168.20.0 255.255.255.0 192.168.10.1
Modify the Static Routes <Add, Delete, Modify or
eXit>[eXit]:
3. Enter the desired option to add, delete, or modify additional static
routes or enter x to return to the main menu.
Netmask Gateway
Gateway
189.168.10.1
Gateway
192.168.10.1
Metric
Metric
1
Metric
1
2
4-25