4
3COM Security Switch 6200 Hardware and Software Users Guide
The system uses a menu driven configuration interface (cos_config) for
configuration purposes. This tool supports adding, modifying, or deleting any
of the system configuration parameters.
This configuration interface is launched from the UNIX admin prompt. To
launch this tool, complete the following:
1.
Log into your system as admin.
username: admin
password: admin
2.
Execute the following command at the admin prompt. NOTE: If you
configuring your Security Switch 6200 system straight from the
Interview, you can select Item 3 from the Main Menu.
[admin@xxxxx bin]# cos_config
Once the configuration tool is launched, you are presented with an interactive
main menu.
Configuring the
Security Switch 6200
System
4-1