3Com 3CR13501-73 Hardware And Software Manual page 49

Configuring the Security Switch 6200 System
3COM Security Switch 6200 Hardware and Software Users Guide
Access - specifies the access privilege a user has. Valid values include:
read-only - user has only read access to the MIB; read-write - user has
both read and write access to the MIB.
OID - specifies the MIB subtree that the user can access. For example:
"iso" for the whole tree, or "mib-2" to limit access to just the MIB objects
that are part of the mib-2 tree. Smaller portions of the MIB can be
selected, such as entering "interfaces" to restrict access to just the
interface table.
7. Configure SNMP Trap Destinations. For example:
Enter choice <1 - 4, X>[X]: 4
SNMP Traps
==========
Destination Port
Change the SNMP Trap Destinations <Add, Delete, Modify
or eXit>[eXit]: a
Enter Trap Destination [0.0.0.0]: 10.2.1.48
Enter Port Number [162]:
Enter Trap Type <trap, inform>[trap]:
Enter SNMP Version <SNMPv1, SNMPv2c, SNMPv3>[SNMPv1]:
Enter Community []: foobar
SNMP Traps
==========
Destination
10.2.1.48
Change the SNMP Trap Destinations <Add, Delete, Modify
or eXit>[eXit]:
8. Enter the desired option or enter X to return to SNMP
Configuration Menu.
SNMP configuration
==================
1) SNMP Server
2) Communities
3) SNMPv3 Users
4) Trap Destinations
X) Exit1) SNMP Server
9. Enter the desired option or enter X to return to the main menu.
Type Version
Port Type
162 trap
Community
Version Community
SNMPv1 foobar
4-17