Transport; Installation - Kalkomat Comboboxer Technical Information

5. Transport

Machine should be transported in vertical position. Machines are shipped
on a wooden 41" x 53" palette, and sides are covered with special thick
(~3/8") multi-layer cardboard 93" tall (from the bottom of the pallet). The
total weight of the box is approx. 491 lbs.
After machine is taken out of the box, it should be transported in
horizontal position with the help of two wheels. Machine can, in special
cases (exp. if it does not fit in doorway), be taken apart and then
reassembled. This procedure should be done by a specialist or someone
familiar with all technical information.

6. Installation

Machine, after being taken out of the box, should be placed in vertical
position and the base should be leveled. To level the machine correct tools
should be used (exp. laser level or typical manual construction heavy duty
level). Turning several screws under the base allows for level adjustment.
After plugging the machine to grounded power outlet it should be ready to
use. Please note, machine placed outdoor MUST be connected to
grounded GFCI type power outlet.
Make sure that there is enough clearance on the sides and in front of the
machine, so the player will not hit any objects or person after punching the
bag. Recommended safety radial distance if 5 feet from the point where
the bag drops to the lower position. Make sure that machine is not
accessible from it's back to anyone while played. The installer of the
machine is responsible for defining the safe clearance.
6