List Of Connectors - Kalkomat Comboboxer Technical Information

List of connectors:

J1 – connector for coin acceptor
J2 – connector for bill acceptor
J3 – connector for power supply to bill acceptor, ticket
dispenser, capsule dispenser, thermal printer
J4 - connector for ticket dispenser, capsule dispenser, thermal
printer
J5 & J7 – front panel backlight
J6 – connector for main board power supply (12V supplied by
AC power supply)
J8 – connector for power supply
J9 – sensor connector
J10 – connector for buttons GAME and START BOXER
J11 – connector for mechanical counter
J12 – connector for speaker
SW-ADD – connector for START KICKER
S1 – service setting switches
S2 – step potentiometer for setting sensor sensitivity (0 – min,
9 - max)
SW1 & SW2 – help buttons (up/down)
R362 – potentiometer for volume control
IC37 – speech synthesizer
IC34 – main processor socket
LED-A - connector for Kicker power supply
LED-B - connector for Boxer and Kicker sensors
LED-C - connector for siren (optional)
PRINTER - connector for thermal printer
BOXNET/ TOURNAMENT - connector for BoxNet or
BoxTournament for PC
LED-A and LED-B connectors
18