How To Check The Solenoid - Kalkomat Comboboxer Technical Information

HOW TO CHECK THE SOLENOID

Proper operation of either of solenoids can be verified by releasing
the punching bag (when checking Boxer) or kicker/soccer arm
(when checking Kicker/Soccer) electronically. This can be done by
first pressing by pushing a release button located on the side power
supply (not the main board). Each power supply is labeled, if you
want to check punching bag, press the button on power supply
labeled "Boxer", if you want to check kicker/soccer arm, press the
button on power supply labeled "Kicker". Power up the machine
and press this button. If the bag is released the solenoid is working.
Solenoid Release Button
If the bag does not come down there may be a problem with the
solenoid. Remove the two solenoid wires connected to the power
supply circuit board. Unscrew the two terminals and pull these wires
out.
59