3Com OfficeConnect 3C892 Setting Up page 3

3 Select Protocol and then click Add .
The Select Network Protocol dialog box appears.
Figure 2 Select Network Protocol Dialog Box
4 From the Manufacturers list box, select Microsoft , and then from the Network
Protocols list box, select TCP/IP .
5 Click OK .
6 From the Network Configuration list box, select TCP/IP and then click Properties .
Figure 3 Network Dialog Box
7 Select IP Address .
The IP Address dialog box appears.
8 For static IP addresses, Specify an IP Address should be selected and an IP
address and subnet mask for your computer should be entered. (You can obtain
this information from your system administrator or ISP.)
9 Select Advanced and then check the box to set TCP/IP as the default protocol.
Setting Up TCP/IP for Windows and Macintosh
3