3Com OfficeConnect 3C892 Setting Up page 14

S U ISDN LAN M O A S N
14
ETTING P THE ODEM N TATIC ETWORK
A call is launched to your ISP. A congratulations message appears when you
successfully connect to your ISP. This verifies the correct configuration of your
ISDN line and ISP connection.
This configuration covers the typical parameters needed to connect to your ISP.
There are additional parameters for this ISP connection which have been set to
a typical default. These parameters include Domain Name, Compression, NAT,
and WAN Link IP Address. In addition, you can enter a second telephone for
connection to your ISP. For information on these parameters and instructions for
changing their default values, refer to the OfficeConnect ISDN LAN Modem
User Guide.
8 Click Continue to connect to the ISDN LAN modem Web site where you should
register the product and view the ReadMe file which contains the latest
information.
Bookmark this URL for all the latest, up to date information about your ISDN
LAN modem (http://www.remoteaccess.3com.com/support/docs/lanmodem).
If you would like to configure another ISP or configure a connection to a
Configure Additional
remote office do the following. If you are using the ISDN LAN modem custom
Parameters
Web browser, click Configure Modem to configure additional parameters. If
you are not using the ISDN LAN modem Web browser, enter the following URL:
http://lanmodem/mainpage.
For advanced configuration and other ISDN LAN modem details, refer to the
OfficeConnect ISDN LAN Modem User Guide. The Advanced Configuration
section of the OfficeConnect ISDN LAN Modem User Guide describes how to
connect to private networks such as a remote office LAN and provides
instructions for changing default settings. You should follow the typical
configuration steps first so that you can have your ISDN line parameters set up
before you configure the advanced parameters.
Rev. 09/15/97