Isdn Spid Auto-Trigger - 3Com 3012 Command Reference Manual

3Com Router Command Reference Guide Addendum for V1.2
Parameter
timer-name: Name of Q931 timer. Refer to the following table for a description in
detail.
time-interval: Interval of timer. Refer to the following table for a description in detail.
all: To be used to restore the default interval values of all the Q931 timers.
Description
Using the isdn q931-timer command, you can configure the interval for a Q931
signaling timer. Using the undo isdn q931-timer command, you can restore the
default interval values of Q931 signaling timers.
Different timers have different default values. Refer to the following table for a
description in detail.
Table 6-2 Description of Q931 timers
timer-name
t301
t302
t303
t304
t305
t308
t309
t310
t313
t316
t322
Example
Set the timer T322 to 6 seconds.
[3Com-Serial2:15]isdn q931-timer t322 6

6.9 isdn spid auto-trigger

Syntax
isdn spid auto-trigger
View
ISDN BRI Interface view
Timer Value range (in seconds)
T301 30–1200
T302 5–60
T303 2–10
T304 10–60
T305 4–30
T308 2–10
T309 10–180
T310 10–180
T313 2–10
T316 20–180
T322 2–10
95
Default value (in seconds)
180
15
5
30
30
5
90
30
5
120
4