Chapter 5 X2T Configuration Commands - 3Com 3012 Command Reference Manual

3Com Router Command Reference Guide Addendum for V1.2

Chapter 5 X2T Configuration Commands

5.1 debugging x25 x2t
Syntax
debugging x25 x2t { all | event | packet }
View
All views
Parameter
all: Enables all X2T debugging.
event: Enables the X2T event debugging.
packet: Enables the X2T packet debugging.
Description
Using the debugging x25 x2t command, you can enable X2T debugging.
Example
Enable the X2T event debugging.
[Router] debugging x25 x2t event
5.2 display x25 x2t route
Syntax
display x25 x2t route
View
All views
Parameter
None
84