3Com 3012 Command Reference Manual page 86

3Com Router Command Reference Guide Addendum for V1.2
undo translate ip ip-address port port-number
View
System view
Parameter
ip-address: Local IP address.
port port-number: TCP port number.
x25 x.121-address: The destination X.121 address after the address translation.
Description
Using the translate ip command, you can configure an X2T forwarding route from an
IP network to an X.25 network. Using the undo translate ip command, you can
disable the configuration that has been made.
Whenever an IP host sends packets to the specified IP address and port of the router,
the router will translate the IP packets into X.25 packets upon the receipt and forward
them to the X.121 address on the X.25 network.
Example
Configure an X2T forwarding route for forwarding the packets that the local device
receives at 10.110.54.18:102 to the X.121 address 12321.
[Router]translate ip 10.110.54.18 port 102 x25 12321
5.5 translate x25
Syntax
translate x25 x.121-address ip ip-address port port-number
undo translate x25 x.121-address
View
System view
Parameter
x25 x.121-address: Destination X.121 address.
ip-address: The destination IP address after the translation.
86