Ntp-Service Authentication Enable; Ntp-Service Authentication-Keyid - 3Com 3012 Command Reference Manual

3Com Router Command Reference Guide Addendum for V1.2

4.6 ntp-service authentication enable

Syntax
ntp-service authentication enable
undo ntp-service authentication enable
View
System view
Parameter
None
Description
Using the ntp-service authentication enable command, you can enable
authentication of NTP services. Using the undo ntp-service authentication enable
command, you can disable authentication.
By default, authentication is disabled.
Example
Enable NTP authentication.
[3Com] ntp-service authentication enable

4.7 ntp-service authentication-keyid

Syntax
ntp-service authentication-keyid number authentication-mode md5 value
undo ntp-service authentication-keyid number
View
System view
Parameter
number: Key number in the range of 1 to 4294967295.
value: Key information, which contains 1 to 32 ASII characters.
72