Ntp-Service Unicast-Server - 3Com 3012 Command Reference Manual

3Com Router Command Reference Guide Addendum for V1.2
Example
Set the peer at 128.108.22.44 to be the synchronization source of the local device,
allowing the remote peer to synchronize with the local clock. In addition, version 3 is
adopted, and IP address of Ethernet 0 is used as the IP source address carried by
the NTP messages.
[3Com] ntp-service unicast-peer 128.108.22.44 version 3 source-interface
Ethernet 0

4.18 ntp-service unicast-server

Syntax
ntp-service unicast-server X.X.X.X [ version number | authentication-keyid keyid
| source-interface { interface-name | interface-type interface-number } | priority ] *
undo ntp-service unicast-server X.X.X.X
View
System view
Parameter
X.X.X.X: IP address of the remote server.
version: Defines NTP version.
number: NTP version number in the range of 1 to 3.
authentication-keyid: Defines authentication key ID.
keyed: The key ID should be carried in the messages sent to the remote server,
which is in the range of 1 to 4294967295.
source-interface: Specifies the interface name.
interface-name: Interface name. The IP address of the interface will be used as the
source IP address of the NTP messages that the local device sends to the defined
server.
interface-type:
interface-number.
interface-number: Interface number, which identifies an interface along with
interface-type.
priority: Specifies the server to be the preferred server.
Interface type, which
82
identifies an interface along with