Protocol Inbound - 3Com 3012 Command Reference Manual

3Com Router Command Reference Guide Addendum for V1.2
Close the SSH process of task 36 on the router.
[3Com] kill ssh userid 36

3.9 protocol inbound

Syntax
protocol inbound { ssh | telnet } numbers [ acl acl-number ]
View
System view
Parameter
ssh: Supports SSH.
telnet: Supports Telnet..
numbers: Specifies the maximum number of connections that the protocol is allowed
to set up. It is in the range of 0 to 5, with 0 indicating that the protocol is not supported.
By default, the allowed maximum number of Telnet connections is 5 and no SSH
connection is allowed.
acl acl-number: Specifies the number of a basic ACL for an IP address. It is in the
range of 0 to 99, with 0 indicating that no ACL is used.
Description
Using the protocol inbound command, you can specify the protocol and the
maximum number of the protocol specific connections that the system supports. .
The maximum number of Telnet connections defaults to 5 and the maximum number
of SSH connections defaults to 0.
Given SSH has been enabled but the RSA key has not been configured on the local
device, the SSH user will still be unable to pass the login authentication. The
configuration result will take effect the next time when the user logs in the system.
Example
Set the system to support three SSH connections and not to adopt ACL.
[3Com] protocol inbound ssh 3
56