4.4 Menu Bar
Depending on the actual device status and device type, some menu items may be enabled or disabled.
4.4.1 [File] menu
Clicking the [File] menu displays the pull-down menu as shown below.
This menu mainly contains commands related to file operation.
(1)
[Load] command
The [Load] command allows you to select a program file.
The selected program file is programmed into the flash memory of the device by executing
the [Program] command or [Autoprocedure (EPV)] command.
Chapter 4 Using The GUI Software
Figure 4-2: [File] Menu
Figure 4-3: HEX File Selection Window
Preliminary User's Manual U17271EE1V0UM00
53