Subscribe to Our Youtube Channel
Related Manuals for EINHELL BT-TB 13 E Digital
Summary of Contents for EINHELL BT-TB 13 E Digital
- Page 1 BT-TB 13 E Digital Original operating instructions Bench Drill Art.-Nr.: 42.507.51 I.-Nr.: 21010 Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 1 Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 1 14.10.2020 11:25:15 14.10.2020 11:25:15...
- Page 2 - 2 - Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 2 Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 2 14.10.2020 11:25:16 14.10.2020 11:25:16...
- Page 3 - 3 - Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 3 Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 3 14.10.2020 11:25:18 14.10.2020 11:25:18...
- Page 4 - 4 - Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 4 Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 4 14.10.2020 11:25:24 14.10.2020 11:25:24...
-
Page 5: Table Of Contents
Table of contents 1. Safety regulations 2. Layout and items supplied 3. Proper use 4. Technical data 5. Before starting the equipment 6. Operation 7. Replacing the power cable 7. Replacing the power cable 8. Cleaning, maintenance and ordering of spare parts 9. - Page 6 Declaration of conformity: Products bearing this symbol comply with all applicable Community legislation of the European Economic Area. Danger! - Read the operating instructions to reduce the risk of injury. Caution! Wear ear-muff s. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask.
-
Page 7: Safety Regulations
Danger! and refrigerators. There is an increased risk When using the equipment, a few safety pre- of suff ering an electric shock if your body is cautions must be observed to avoid injuries and earthed. damage. Please read the complete operating c) Keep the power tool out of the rain and instructions and safety regulations with due care. - Page 8 e) Avoid abnormal working postures. Make sure Keep cutting tools sharp and clean. Ca- you stand squarely and keep your balance at refully maintained cutting tools with sharp all times. This will enable you to control the cutting edges will jam less and are easier to power tool better in unexpected situations.
- Page 9 h) Never remove drilling chips from the dril- clean to enable you to work well and safely. Fol- ling area while the power tool is running. low the maintenance regulations and the instruc- To remove chips, move the drilling tool tions for changing mounted attachments such as away from the workpiece, switch off...
-
Page 10: Layout And Items Supplied
Keeping an eye on your work Special information about the laser Always keep an eye on your machine and the object you are working on. Never use the machine Caution! Laser radiation when you are not concentrating or are distracted. Do not look into the beam Never use the machine when you are under the Laser class 2... -
Page 11: Proper Use
17. 1x hex key (8mm) also be used. The machine is intended for use by 18. Cover cap adults only. 19. Vise (75mm jaw width) 20. 2x screws for vise The equipment is to be used only for its prescri- 21. -
Page 12: Before Starting The Equipment
• precautions. Factors aff ecting the actual load level Do not overload the appliance. • for workers include the characteristics of the work Have the appliance serviced whenever ne- space and other sources of noise, i.e. the number cessary. • of machines and other active neighboring proces- Switch the appliance off when it is not in use. -
Page 13: Operation
Connect the machine only to a socket with the Do not use tools whose shaft is damaged or properly installed earthing contact. which are deformed or fl awed in any other way. The table drill is equipped with a no-volt trip that is Use only accessories and attachments that are designed to protect the operator from an undesi- specifi... - Page 14 • use the “+” button or the “-” button to set the To turn off both the laser and the light, actuate required speed To be able to read the drilling the laser button (14) a fourth time. depth exactly from the display, use the speed Important! Never look directly into the laser beam! button (12) again to switch back to “Depth –...
-
Page 15: Replacing The Power Cable
If you replace any safety-relevant compo- to avoid danger. nents, e.g. the microswitch of the chip guard, they must be checked for proper operation Einhell UK Ltd. before the drill is switched on again. Unit 9 Stadium Court • To prevent any assembly errors during main-... -
Page 16: Storage
10. Storage Store the equipment and accessories in a dark and dry place at above freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original pa- ckaging. Before transporting the bench drill, dismantle it into its individual parts and pack them ideally in the tool’s original packaging for the best possible protection against impact and shock. - Page 17 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers ac- companying products is permitted only with the express consent of the Einhell Germany AG. Subject to technical changes - 17 - Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 17...
- Page 18 5. To make a claim under the guarantee, please register the defective device at: www.Einhell-Service.com. Please keep your bill of purchase or other proof of purchase for the new device. Devices that are returned without proof of purchase or without a rating plate shall not be covered by the guarantee, because appropriate identifi...
- Page 19 EÚ a noriem pre výrobok Lýsir uppfyllingu EU-reglna og annarra staðla vöru a cikkekhez az EU-irányvonal és Normák szerint a következő konformitást jelenti ki Tischbohrmaschine BT-TB 13 E Digital (Einhell) 2014/29/EU 2006/42/EC Annex IV 2005/32/EC_2009/125/EC Notifi ed Body: (EU)2015/1188 Reg.
- Page 20 EH 10/2020 (01) Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 20 Anl_BT-TB_13_E_digital_EX_UK_SPK7.indb 20 14.10.2020 11:25:30 14.10.2020 11:25:30...
Need help?
Do you have a question about the BT-TB 13 E Digital and is the answer not in the manual?
Questions and answers